Setup Movie
Preparing FlexTally
In order to use this product, place DIP switches 1 and 2 on the back side of the FlexTally station unit into the OFF position.
The positions of switches 3 to 8 depend on how you using FlexTally. Please refer to this link for the settings of switches 3 to 8.
How to Connect
●When using your switcher via unit operation
- Please note the USB cable to connect between a switcher and USB-GPIO Converter for FlexTally is not included.
●When using your switcher via iPad app
- Please note Lightning to USB 3 camera adapter is not included.
●When using your switcher via PC app
- Please note the USB cable to connect between a PC and USB-GPIO Converter for FlexTally is not included.
Station Setting
●Roland V-1HD, Roland V-1 SDI, Lumantek ez-Pro VS4
The DIP switch settings for the station are GPIO and Type 2.
●Roland V-8HD
The DIP switch settings for the station are GPIO, Type 2, and No.8.
* Must be compatible with Switcher Ver. 1.0.4 or later. If you are using an older version, please follow Roland’s instructions for updating, and be sure to perform a factory reset before using it.
* PST (Preset) output is not supported.